Electrocatalytic performance comparison of Pt/V and Pd/V electrocatalysts for ethanol oxidation reaction

Authors

  • E. L. da Silva Author
  • A. Cuña Author
  • S. Khan Author
  • M. Cadorin Author
  • S. Pianaro Author
  • R. B. Otto Author
  • C. F. Malfatti Author

DOI:

https://doi.org/10.24084/repqj15.350

Keywords:

Energy conversion, Direct Ethanol Fuel Cells, Pt catalyst, Pd catalyst, Ethanol oxidation reaction

Abstract

Direct ethanol fuel cells (DEFCs) operate at low temperature, which makes the oxidation and reduction reactions slower, requiring electrocatalysts able to accelerate these reactions. In the present work, commercial Vulcan carbon (V) supported Pt and Pd catalysts were compared as electrocatalysts for ethanol oxidation reaction (EOR) in acidic and alkaline medium, respectively. Cyclic voltammetries obtained in presence of ethanol showing a better catalytic performance for the Pd/V electroctalyst compared to the Pt/V electrocatalyst. The maximum current density related with the EOR in a 1.0 mol L-1 ethanol + 1.0 mol L-1 NaOH solution was 236.9 A g Pd-1 for Pd/V. The better performance of the Pd/V electrocatalyst can be associated with a lower Pd nanoparticles sizes and higher particles dispersion onto the Vulcan carbon surface in the Pd/V electrocatalyst. The onset potential for the EOR was 0.2 V vs. SCE for the Pt/V sample and -0.6 V vs. Hg/HgO for the Pd/V sample.

Author Biographies

  • E. L. da Silva

    LAPEC/PPGE3M, Universidade Federal do Rio Grande do Sul,  Av. Bento Gonçalves, 9500, setor 4, prédio 43427, sala 
    232 - 91501-970 – Porto Alegre/RS (Brazil) 

  • A. Cuña

    Cátedra de Fisicoquímica, DETEMA, Facultad de Química, Universidad de la República, Montevideo 11800 (Uruguay)

  • S. Khan

    LAPEC/PPGE3M, Universidade Federal do Rio Grande do Sul,  Av. Bento Gonçalves, 9500, setor 4, prédio 43427, sala 
    232 - 91501-970 – Porto Alegre/RS (Brazil) 

  • M. Cadorin

    LAPEC/PPGE3M, Universidade Federal do Rio Grande do Sul,  Av. Bento Gonçalves, 9500, setor 4, prédio 43427, sala 
    232 - 91501-970 – Porto Alegre/RS (Brazil)

  • S. Pianaro

    Departamento de Engenharia de Materiais, Universidade Estadual de Ponta Grossa, Av. Carlos Cavalcanti, 4748 - Bloco L - Campus de Uvaranas, 84030900 - Ponta Grossa/PR (Brazil)

  • R. B. Otto

    Automation and Simulation of Electrical Systems Laboratory (Lasse)- Itaipu Technological Park (PTI)Av. Tancredo 
    Neves, 6731. Foz do Iguaçu - Paraná (Brazil)

  • C. F. Malfatti

    LAPEC/PPGE3M, Universidade Federal do Rio Grande do Sul,  Av. Bento Gonçalves, 9500, setor 4, prédio 43427, sala 
    232 - 91501-970 – Porto Alegre/RS (Brazil)

Published

2024-01-12

Issue

Section

Articles