Modelling, Simulation and Comparative Study between Switched Reluctance Generator 8x6 and Switched Reluctance Generator 12x8

Authors

  • R. J. Dias Author
  • B. A. Oliveira Author
  • K. A. Silva Author
  • C.P. Alves Author
  • F. A. Ferreira Author
  • R. R. Aguiar Author

DOI:

https://doi.org/10.24084/repqj18.340

Keywords:

Three-phase switched reluctance machine (12x8), Four phases switched reluctance machine, simulation (8x6), comparative study

Abstract

This paper presents the modelling, simulation and comparative study between switched reluctance generator 8x6 and switched reluctance generator 12x8. During work, the structural properties of the rotor and stator laminates of these machines are exposed. This information was used to perform mathematical modelling for both topologies. Based on this modelling, a computer simulation model was developed in the Simulink/Matlab® environment where several tests were carried out. To ensure comparability between machines, the output power in both topologies was set to 735,5 VA. After analyzing the results obtained during the simulations, it was found that the topology of the switched reluctance generator 8x6 is more efficient than 12x8

Author Biographies

  • R. J. Dias

    Federal Institute of Education, Science and Technology of Goiás. Brazil

  • B. A. Oliveira

    Federal Institute of Education, Science and Technology of Goiás. Brazil

  • K. A. Silva

    Federal Institute of Education, Science and Technology of Goiás. Brazil

  • C.P. Alves

    Federal Institute of Education, Science and Technology of Goiás. Brazil

  • F. A. Ferreira

    Federal Institute of Education, Science and Technology of Goiás. Brazil

  • R. R. Aguiar

    Federal Institute of Education, Science and Technology of Goiás. Brazil

Downloads

Published

2024-01-12

Issue

Vol. 18 No. 4 (2020)

Section

Articles