Software tool for the analysis of electromagnetic disturbances propagation

Authors

  • M. Chindris Author
  • A. Cziker Author
  • A. Miron Author
  • A. Sumper Author
  • A. Sudrià-Andreu Author
  • R. Villafafila-Robles Author

DOI:

https://doi.org/10.24084/repqj08.703

Abstract

The analysis of the conducted electromagnetic

disturbances propagation is a complex issue, involving

detection and analysis of electromagnetic disturbances,

modelling of power grids’ elements, and study of the influence

on the grids’ elements (electric lines and power transformers) of

the existing disturbances.

The paper presents a software tool for analyzing the

propagation of electromagnetic disturbances. It was

implemented as a virtual instrument developed in the graphic

programming environment LabVIEW, and helps for the study

of propagation of harmonic and unbalanced current/voltages,

over-currents and voltage dips caused by common faults in

radial distribution power grids.

Author Biographies

  • M. Chindris

    Department of Power Systems

    Electrical Engineering Faculty, Technical University of Cluj-Napoca

    15th C. Daicoviciu Street, 400020 Cluj-Napoca (Romania)

    Phone number:+0040 264 401451, e-mail: Mircea.Chindris@eps.utcluj.ro

  • A. Cziker

    1 Department of Power Systems

    Electrical Engineering Faculty, Technical University of Cluj-Napoca

    15th C. Daicoviciu Street, 400020 Cluj-Napoca (Romania)

    Phone number:+0040 264 401451, e-mail: Andrei.Cziker@eps.utcluj.ro

  • A. Miron

    Department of Power Systems

    Electrical Engineering Faculty, Technical University of Cluj-Napoca

    15th C. Daicoviciu Street, 400020 Cluj-Napoca (Romania)

    Phone number:+0040 264 401451, e-mail: Anca.Miron@eps.utcluj.ro

  • A. Sumper

    Universitat Politècnica de Catalunya, Centre d'Innovació Tecnològica en Convertidors Estàtics i Accionaments; (CITCEA

    UPC), Departament d'Enginyeria Elèctrica.

    EU d'Enginyeria Tècnica Industrial de Barcelona. Comte d'Urgell, 187; 08036 Barcelona, Spain; Email:

    sumper@citcea.upc.edu

    Catalonia Institute for Energy Research (IREC); C. Josep Pla 2, B2, planta baixa, 08019 Barcelona, Spain.

  • A. Sudrià-Andreu

    Universitat Politècnica de Catalunya, Centre d'Innovació Tecnològica en Convertidors Estàtics i Accionaments; (CITCEA

    UPC), Departament d'Enginyeria Elèctrica.

    EU d'Enginyeria Tècnica Industrial de Barcelona. Comte d'Urgell, 187; 08036 Barcelona, Spain; Email:

    sudriá@citcea.upc.edu

    Catalonia Institute for Energy Research (IREC); C. Josep Pla 2, B2, planta baixa, 08019 Barcelona, Spain.

  • R. Villafafila-Robles

    Universitat Politècnica de Catalunya, Centre d'Innovació Tecnològica en Convertidors Estàtics i Accionaments; (CITCEA

    UPC), Departament d'Enginyeria Elèctrica.

    EU d'Enginyeria Tècnica Industrial de Barcelona. Comte d'Urgell, 187; 08036 Barcelona, Spain; Email roberto.villafafila@citcea.upc.edu

Published

2024-01-24

Issue

Vol. 8 No. 1 (2010)

Section

Articles