Analysis of Faults in Power Distribution Systems With Distributed Generation

Authors

  • J. Faig Author
  • J. Melendez Author
  • S. Herraiz Author
  • J. Sánchez Author

DOI:

https://doi.org/10.24084/repqj08.502

Abstract

The paper studies the location of single-phase

faults abstract in power distribution systems with distributed

generation by means of impedance-based methods. These

methods are based on the measurement of voltages and currents

and in one measurement point and distributed generation cause

errors in the estimated location.

The paper shows the influence of parameters such as the

magnitude of distributed generation, the fault impedance and

the relative position of the fault location and the distributed

generation in the estimated location.

Author Biographies

  • J. Faig

    Institut d’Informàtica i Aplicacions(IIiA)

    University of Girona(UdG)

    Av. Lluis Santalo s/n. EPS-Universitat de Girona E17071 Girona (Spain)

    Phone/Fax number:+34972418391/ +3497248098, e-mail: jfaig@eia.udg.edu

  • J. Melendez

    Institut d’Informàtica i Aplicacions(IIiA)

    University of Girona(UdG)

    Av. Lluis Santalo s/n. EPS-Universitat de Girona E17071 Girona (Spain)

    Phone/Fax number:+34972418391/ +3497248098, e-mail: quimmel@eia.udg.edu

  • S. Herraiz

    Institut d’Informàtica i Aplicacions(IIiA)

    University of Girona(UdG)

    Av. Lluis Santalo s/n. EPS-Universitat de Girona E17071 Girona (Spain)

    Phone/Fax number:+34972418391/ +3497248098, e-mail: sherraiz@eia.udg.edu

  • J. Sánchez

    ENDESA Distribución

    Avda. Paral·lel 51, 08004 Barcelona

    Phone: +34935091232, e-mail: jorge.sanchez@endesa.es

Downloads

Published

2024-01-24

Issue

Vol. 8 No. 1 (2010)

Section

Articles