Investigation of gaseous emissions and ash deposition in a pilot-scale PF combustor co-firing cereal co-product biomass with coal

Authors

  • Ala Khodier Author
  • Nigel Simms Author
  • Paul Kilgallon Author
  • Nigel Legrave Author

DOI:

https://doi.org/10.24084/repqj08.368

Abstract

This study presents the results of investigations

into the gaseous emissions and ash deposition characteristics

from combustion of Cereal Co-product mixed with coal in a

100 kWth pulverised fuel combustor. Combustion gas emission

samples for CO2 , O2 , H2O, SO2 , CO, NO, NO2 , N2O, HCl, HF,

were obtained on-line by a high resolution multi-component

Fourier Transform Infra-Red gas analyser. Ash deposit samples

were collected from the flue gas using three air-cooled probes

that simulate heat exchanger tubes with surface temperatures of

500, 600 and 700 °C. The deposits formed were analysed using

SEM/EDX and XRD techniques to assess their corrosion

potential.

Author Biographies

  • Ala Khodier

    Energy Technology Centre, School of Applied Sciences, Cranfield University

    Cranfield, Bedfordshire MK43 0AL, England, UK

    Phone: +44 (0) 1234 750111, e-mail: a.khodier@cranfield.ac.uk

  • Nigel Simms

    Energy Technology Centre, School of Applied Sciences, Cranfield University

    Cranfield, Bedfordshire MK43 0AL, England, UK

    Phone: +44 (0) 1234 750111, e-mail: n.j.simms@cranfield.ac.uk

  • Paul Kilgallon

    Energy Technology Centre, School of Applied Sciences, Cranfield University

    Cranfield, Bedfordshire MK43 0AL, England, UK

    Phone: +44 (0) 1234 750111, e-mail: p.j.kilgallon@cranfield.ac.uk

  • Nigel Legrave

    Energy Technology Centre, School of Applied Sciences, Cranfield University

    Cranfield, Bedfordshire MK43 0AL, England, UK

    Phone: +44 (0) 1234 750111, e-mail:  n.a.legrave@cranfield.ac.uk

Downloads

Published

2024-01-24

Issue

Section

Articles