Control strategy to improve the power factor with a hybrid filter

Abstract

Nowadays an electrical system must provide adequate electrical power quality so that it meets the international standards. To do this, this paper develops a control strategy for an active compensator based on a hybrid filter topology. This topology is formed by an active power filter of series connection and a passive filter of parallel connection. The proposed strategy is based on minimizing the rms value of the voltage at the point of common coupling so that the source transfers the power demanded by the load. Thus, the determination of the reference signal is posed as a constrained optimization problem. The strategy was proposed for four-wire systems and it allowed the compensation of current harmonics, reactive power and neutral current. Finally, a simulation platform in Matlab-Simulink was developed. This allowed the verification of the new strategy for different types of loads.