Air flow prediction and evaluation of ventilation effectiveness with different zonal configurations

Authors

  • N. Guerfala Department of Mechanical Engineering Université de Sherbrooke Author
  • H. Fellouah Department of Mechanical Engineering Université de Sherbrooke Author
  • A.Daoud Institut de Recherche d'Hydro-Québec Laboratoire des Technologies de l'Énergie (LTE) Author
  • N. Galanis Department of Mechanical Engineering Université de Sherbrooke Author

DOI:

https://doi.org/10.24084/repqj10.528

Keywords:

Air flow, zonal method, numerical simulation, ventilated room, ventilation efficiency

Abstract

This paper proposes a numerical method for the study of ventilation efficiency in buildings. The developed model is validated with the experimental results of Nielsen [5] who tested the isothermal flow in a scaled model of a ventilated room. A zonal method is used to predict airflow patterns in the same ventilated room. The different equations governing the flow in the room were coded in Matlab for different operating conditions, different zonal configurations of the room and different number of cells (control volumes). The efficiency of the ventilation was determined by calculating the number of air changes per hour (ACH) for each cell. The present results show the importance of the inlet air flow rate, the space resolution and the jet inlet dimensions on the determination of air quality.

Published

2024-01-17

Issue

Section

Articles