Particle Swarm Based Optimization of Power Losses in Network Using STATCOM

Authors

  • V. Tuzikova Author
  • Z. Müller Author
  • J. Švec Author
  • V. Valouch Author
  • J. Tlustý Author

DOI:

https://doi.org/10.24084/repqj12.337

Keywords:

Electric power system, Simulation, Power losses, STATCOM, Particle swarm optimization

Abstract

The main goal of this paper is to define the best location for the STATCOM compensator in order to minimize active power losses in the grid, using Particle Swarm Optimization algorithm.

Author Biographies

  • V. Tuzikova

    Department of Electric Power Engineering 
    Faculty of Electrical Engineering, CTU in Prague 
    Technická 2, 166 27 Prague, Czech Republic

  • Z. Müller

    Department of Electric Power Engineering 
    Faculty of Electrical Engineering, CTU in Prague 
    Technická 2, 166 27 Prague, Czech Republic

  • J. Švec

    Department of Electric Power Engineering 
    Faculty of Electrical Engineering, CTU in Prague 
    Technická 2, 166 27 Prague, Czech Republic 

  • V. Valouch

    Department of Electric Power Engineering 
    Faculty of Electrical Engineering, CTU in Prague 
    Technická 2, 166 27 Prague, Czech Republic

  • J. Tlustý

    Department of Electric Power Engineering 
    Faculty of Electrical Engineering, CTU in Prague 
    Technická 2, 166 27 Prague, Czech Republic 

Downloads

Published

2024-01-24

Issue

Vol. 12 No. 3 (2014)

Section

Articles