Production of synthesis gas from dry reforming of propane with carbon dioxide over ceria-promoted nickel foam catalysts

Authors

  • J. Karuppiah Author
  • E. Linga Reddy Author
  • M.S.P. Sudhakaran Author
  • S.B. Lee Author

DOI:

https://doi.org/10.24084/repqj14.443

Keywords:

Syngas, Propane reforming, Nickel foam, Ceria, Catalytic activity

Abstract

A series of nickel foam supported cerai catalysts (ceria/NiF) for dry reforming of propane with carbon dioxide were prepared and their performance were evaluated at temperatures in the range of 520-600°C. Among the catalysts examined the 4 wt.% CeO2/NiF exhibited better low-temperature activity for the DRP, which is attributed to the formation of well- isolated nanosize CeO2 particles and highly reducible metal oxide species over the NiF support. The XPS and temperature programmed reduction (TPR) data also supported the incorporation of ceria into the NiO surface layer formed over NiF support, which was substantially higher in 4% CeO2/NF catalyst. Due to these favorable properties, the 4 wt.% CeO2/NiF could be considered as an excellent catalyst for DRP.

Author Biographies

  • J. Karuppiah

    Department of Chemical and Biological Engineering 
    Jeju National University, Jeju 690-756 (Korea) 

  • E. Linga Reddy

    Department of Chemical Engineering, Kyungpook 
    National University, Daegu 702-701 (Korea)

  • M.S.P. Sudhakaran

    Department of Chemical and Biological Engineering 
    Jeju National University, Jeju 690-756 (Korea) 

  • S.B. Lee

    Department of Chemical and Biological Engineering 
    Jeju National University, Jeju 690-756 (Korea) 

Published

2024-01-16

Issue

Section

Articles