Consideration on the effects of DERs in the PLC communication channel

Authors

  • J.-I. Cairo Author
  • Jordi Pegueroles Author
  • Fernando Martín Author
  • Maite Hormigo Author

DOI:

https://doi.org/10.24084/repqj14.421

Keywords:

Noise, attenuation, Distributed energy resources, power converters

Abstract

In the intend to use the transmission and distribution power lines as a communication channel, much attention has been provided in the modeling of the transmission media used for the propagation of the signals that transmit the information. Most of this effort has been applied in the broadband propagation characteristics, due to higher bandwidth and the use of higher frequencies that can avoid some interference [1]. In this paper it is proposed a method to better understand parameter differences between line characterization in the different frequencies of interest for Power Line Communications (PLC) applicable to analytically determine the channel model, by analyzing the effects of reflections due to the nodes and branch lines impedance mismatches that are present at the distribution power lines. Nowadays such methodology is empirically determined, so this new approach intends to facilitate the modeling methodology prior to its implementation.

Author Biography

  • J.-I. Cairo

    IREC, Catalonia Institute for Energy Research 
    C. Jardins de les Dones de Negre, 1, Pl. 2a, 08930 Sant Adriá del Besós, Barcelona, Spain

Downloads

Published

2024-01-16

Issue

Section

Articles