Modelling and Power Control of Wind Turbine Driving DFIG connected to the Utility Grid

Authors

  • Karim Belmokhtar Author
  • Mamadou Lamine Doumbia Author
  • Kodjo Agbossou Author

DOI:

https://doi.org/10.24084/repqj09.490

Abstract

In this paper, the modelling and power transfer control of the variable speed wind energy system are presented. Firstly, a Maximum Power Point Tracking (MPPT) method is developed in order to maximize the energy generation of wind system based on doubly fed induction generator (DFIG). Then, the control of both Rotor Side Converter (RSC) and Grid Side Converter (GSC) is studied and the design of a multivariable selective filter is presented. Finally, simulation of a 850 kW doubly fed induction generator wind system was performed in the Matlab / Simulink / SimPowerSystems environment

Author Biographies

  • Karim Belmokhtar

    Department of Electrical and Computer Engineering

    Université du Québec à Trois-Rivières

    Trois-Rivières, G9A 5H7 Canada

    Phone: +001 819 376 5011 3912,

    E-mail: karim.belmokhtar@uqtr.ca

  • Mamadou Lamine Doumbia

    Department of Electrical and Computer Engineering

    Université du Québec à Trois-Rivières

    Trois-Rivières, G9A 5H7 Canada

    Phone: +001 819 376 5011 3912,

    E-mail: mamadou.doumbia@uqtr.ca

  • Kodjo Agbossou

    Department of Electrical and Computer Engineering

    Université du Québec à Trois-Rivières

    Trois-Rivières, G9A 5H7 Canada

    Phone: +001 819 376 5011 3912,

    E-mail: kodjo.agbossou@uqtr.ca

Published

2024-01-17

Issue

Section

Articles